SHOW

Can only be used in combination: show gnomon, show ndlv, show cell, show multiples, show overlaps, show peaks, show all, show lmin, show dmin, show tmax, show tmax and lmin, show tmax and dmin, show uvw, or show uvw1. The keywords show ndlv and show cell can be used after running NODIRAX, the other ones can only be used after running indxpat.

SHOW GNOMON

Displays the peaks found by the xdisp program in the gnomonic projection. The distance of the gnomonic projection plane to the crystal has to be specified.

                  format         show gnomonic  distance
                  default        none
                  examples       show gnomonic  10.0

SHOW NDLV

Displays the spots that were recognized to belong to conic number i, where i is specified in show ndlv i. By using show ndlv i to j all the spots that belong to conics i to j are displayed by the xdisp program. The spots have indices corresponding to their conic number. Can only be used after running NODIRAX.

                  format         show ndlv  integer ( to  integer)
                  default        none 
                  examples       show ndlv  3
                                 show ndlv  2  to  8

SHOW CELL

The conics that were used to construct the cell as specified by show cell i are displayed by xdisp. The cell number should correspond to the number of the reduced cell, not of the combined cell. Can only be used after running NODIRAX.

                  format         show cell  integer
                  default        none
                  example        show cell  13

SHOW MULTIPLES

Displays the predicted multiples in green and all the other spots in yellow. Can only be used after running indxpat.

SHOW OVERLAPS

Displays the predicted overlaps in green and all the other spots in yellow. Can only be used after running indxpat.

SHOW PEAKS

Displays the indexed spots found by the xdisp program in green, and all the other spots in yellow. Can only be used after running indxpat.

SHOW ALL

Displays all the predicted spot positions in yellow. This is the default after running indxpat.

SHOW LMIN

Displays all the low wavelength spots in green and the others in yellow. If a value is specified (optional), all spots diffracting at a wavelength between and will be displayed in green. Can only be used after running indxpat.

                  format         show lmin  
                  default        
                  examples       show lmin
                                 show lmin  0.05

SHOW DMIN

Displays all the high resolution spots in green and the others in yellow. If a value is specified (optional), all spots diffracting at a resolution between and will be displayed in green. Can only be used after running indxpat.

                  format         show dmin  
                  default        
                  examples       show dmin
                                 show dmin  0.2

SHOW TMAX

Calculates and displays the top positions of the selected ellipses. These positions are represented by red circles, all the predicted spot positions are displayed by yellow circles. This command can be useful to estimate the cell volume using calc volume. Can only be used after running NODIRAX and indxpat.

SHOW TMAX AND LMIN

Calculates and displays the top positions of the selected ellipses and the low wavelength spots. The top positions are represented by red circles, the low wavelength spots by green and all the other spots by yellow circles. If a value is specified (optional), all spots diffracting at a wavelength between and are displayed by a green circle. This command can be useful to estimate the cell volume or using calc volume. Can only be used after running NODIRAX and indxpat.

                  format         show tmax and lmin  
                  default        
                  examples       show tmax and lmin
                                 show tmax and lmin  0.05

SHOW TMAX AND DMIN

Calculates and displays the top of the selected ellipses and the high resolution spots. The top positions are represented by red circles, the high resolution spots by green and all the other spots by yellow circles. If a value is specified (optional), all spots diffracting at a resolution between and will be displayed by a green circle. This command can be useful to estimate the cell volume or the resolution limit using calc volume. Can only be used after running NODIRAX and indxpat.

                  format         show tmax and dmin  
                  default        
                  examples       show tmax and dmin
                                 show tmax and dmin  0.2

SHOW UVW

Three direct indices have to be specified with this keyword. All spots with indices that fulfill the equation hu + kv + lw = 0 are displayed by red, all other spots by yellow circles. The red circles lie in one conic. Can only be used after running indxpat.

                  format         show uvw  u v w
                  default        none
                  example        show uvw  3 1 0

SHOW UVW1

Three direct indices have to be specified with this keyword. All spots with indices that fulfill the equation hu + kv + lw = 0 are displayed by red circles, spots with indices that fulfill the equation are displayed by green, all other spots by yellow circles. The red circles lie in one conic, bordered by green circles. Can only be used after running indxpat.

                  format         show uvw1  u v w
                  default        none
                  example        show uvw1   3 1 0